 |
Expander
|
|
Pulse-to-Digital Output Converter |
|
The Robotica
This product is no discontinued.
Expander converts the pulse output of your R/C Servo Controller
into two digital outputs, allowing you to control AC/DC motors,
relays, solenoids and other devices from R/C servo outputs.
When the pulse width at the input is above 1.7 ms, the
Expander sets its Output 1 high and Output 2 low, and when it is
below 1.3 ms then it sets Output 1 low and Output 2 high.
Both outputs will be low when the input pulse width is
between 1.3 ms and 1.7 ms, as the Expander does not respond to a
signal with a pulse width at these values.
Expander is
fully compatible with the
R/C Servo Controller
II and Relay Board.
Expander operates with 8-24V unregulated DC voltage. |
|
|
|
| Product |
UK & EEC Only |
Rest of the World |
| Expander |
£ |
£ |
|
|
|
 |
Technical Specification
|
|
| Pulse Input (fed by R/C Servo
Output) |
<1.3ms |
1.3ms - 1.7ms |
>1.7ms |
| Digital Output 1 |
OFF |
OFF |
ON |
| Digital Output 2 |
ON |
OFF |
OFF |
|
|
|
